PlastoFix P 220 High Performance Plasticising Polymer For Fly Ash Bricks & Edge Builder.

Description

PlastoFix P 220 is a chloride free reducing admixture based on selected acrylic copolymers. It is supplied as a Brown solution which instantly disperses the fine particles in the concrete mix, enabling the water content on the concrete to perform more effectively and improving the consistency of the concrete. This produces higher levels of work ability for the same water content, allowing benefits such as water reduction and increases strengths to be taken.

Uses

To improve strength of fly ash bricks. Improved edges and corners of bricks. Water reducing high performance super plasticiser.

Advantages

Curing Accelerator, Edge Builder, High Compressive strength. Chloride free, safe for use in prestressed and reinforced concrete. Water reduction significantly improves compressive strength at all ages and enhances durability through with no breakage of bricks. Melamine & Formaldehyde free Admixture for targeted result.

Method Of Application

Charge cement &aggregates to concrete mixer as per mix design, mix in dry state for 1-2 minutes. Start addition of 75%-80% mixing water &mix for 2-3 minutes. Plastofix P 220 is added as per the recommended dosage into the remaining mixing water. Then add to concrete mixer &mix for another 2 minutes. Discharge the concrete mix to the brick laying machine.

Features & Benefits

CompatibilityBeing liquid,easily dispersible &compatible with concrete and mortar mixes.
Durabilityincreased durability by improving integral waterproofing of concrete.
PermeabilityIt reduces the permeability of water into concrete..
StrengthHigh Compressive strength is gained by proper use and balanced use of product.
CrackingReduces cracking and breaking of bricks.
EconomicsIt is an economical additive as compare to other concrete admixtures.

Curing

Good curing practice should be maintained. Water spray, wet hessien,etc applied curing membrane should be used. Admixture overdose should be avoided for healthy curing .

Compatibility

PlastoFix P 220 is suitable for use with all types of ordinary portland cements and cement replacement materials such as PFA, GGBFS and microsilica.The product is incompitable with any type of set retarders. The performance of concrete containing more than one admixture should be assessed by the trial mix procedure recommended to avoid unwanted retardation..

Properties

ApperanceDark Brown Liquid
Specific Gravity1.161-1.180 @ 25 C
Chloride Content0 %
Alkali Content< 3 %

Dosage:

Depends upon quantity of cement used in mixed aggregate.

Dosage(as required) 500 mL + For 100 Kg of Cement

Packing

PlastoFix P220 is supplied in 50 Kg and 200 Kg Drums.

Health and Safety

PlastoFix P220 not fall into the hazard classifications. However, it should not be swallowed or allowed to come into contact with skin and eyes. suitable protective gloves and goggles should be worn. Splashes on the skin should be removed with water.In case of contact with the eyes,it should be rinsed immediately with plenty of water and medical advice sought immediately.If swollewed medical attention shall be sought immediately-vomitting should not be induced.

Fire

PlastoFix P220 is water based and Non-Flamable.